Questions about Lian-Li PC-O11DX Dynamic

According to the manufacturer (see: https://lian-li.com/product/pc-o11-dynamic/), the filters are included.

Unfortunately, we currently have no information on when the item will be available and when we will be able to deliver it. As soon as something changes in this regard, we will post it here. Sorry.

Hello, Yes there are 4 dust filters with magnets. One at the top, two on the right and one at the bottom. Personally, I would leave them out during construction because the airflow decreases due to the dust filter.

yes it has. On the right side there are two, one below, one above. There is none at the back. There are nets that are held to the housing with magnets (inside behind the panels) and all these filters can be removed.

Yes, with a vertical GPU you definitely get enough air circulation from the bottom to the top. What you have to bear in mind, however, is that there is pretty much exactly 3 cm between 120mm fans on the bottom and an ATX mainboard, and the 120mm fans (25mm high) also cover about 5 mm of the bottom edge of the mainboard. So if a connection needs more than 3cm (in my case the USB 3.2 Gen 20pin), no fan can be mounted in front of it at the bottom. There are many factors that contribute to the heat in the enclosure, so a generally valid answer as to whether 3+3 is enough is not possible. I bought the case first and with my old PC (i7-860, GTX 970) I had no heat problems even with only one fan on the bottom (in), one on the side (in) and one on top (out). Currently I still have the 970 horizontal and a Ryzen 5 3600 with 2 fans on the bottom (as the 3rd currently has no room), 3 in from the side (in) and 2 on top (out) and no heat issues.

There should be room for a 360 at the top, bottom or inside. However, I doubt whether there is room for a large radiator everywhere AT THE SAME TIME. The O11 is not primarily intended for air coolers, so yes, the large tower coolers are all too big for it. There should also be room for 280s at the top and bottom, but I don't know if the fixings will fit, or if they do, additional screw holes will have to be drilled. I have never tried it myself.

I use the same case with an Aorus Master Z390 and an H150i Pro. I had no problems installing it.

In my case, everything was in perfect condition, no disc was stuck, no power button was stuck and the USB slots had enough space between them. I would ask the customer service about how to proceed: https://helpcenter.digitec.ch/hc/de/requests/new

I would say it depends on what you want. Personally, I have the corsair Ql fans, but they are really only for the Rgb.

There's quite a bit of margin on top, so it should go through without a hitch.

Magetic mesh grilles are included, which are placed on the outside of the enclosure. For the bottom, top and side for 3 fans each. No enclosure fans at the rear, only PSU.

10. three at the top, three at the side, three at the bottom and one at the back.

Hello, I have installed an All-in-One CPU water cooling system above, but side mounting is also no problem, there is plenty of space. You can even place fans in combination with radiators in the right side panel, plenty of space.

If the tower is in stock, then tomorrow.

Yes it can, just feels a bit lost in this housing.

I'm not quite sure, but as far as I can see this only works with the XL case Lian-Li O11Dynamic XL (Midi Tower)

No. The housing does not have a Led

On mine the feet are white not like on the picture. (Product picture).

Yes, it has no drive for CDs

...this enclosure has nothing to connect the fans to. The fans are connected to the mainboard, of course it depends on what kind of fans, RGB or the speed.

No fans are sent with the unit. You have to buy them separately

The configuration with the fans on the bottom and on the side mentioned above will work. However, we advise you to use the configuration recommended by the manufacturer (on your link), as this is designed to optimise the airflow in your case.

Yes. Extracted from the website: Fan (Top) 120mm x3 / 140mm x2(Option) (Side) 120mm x3(Option) (Bottom) 120mm x3 (Option) Radiator 120x 360mm / 120x 240mm / 140x 280mm

Well, it depends if you prefer black or white, it's not like there's a difference between the items, right!

The article can currently be ordered.

Even if the XL version offers more space for disks and fans, the basic version is sufficient for my installation which includes 2 SSDs + 1 SSD.M2 and 2 watercoolings.